Journal of Atmospheric and Environmental Optics, Volume. 14, Issue 3, 228(2019)

Temperature Measurement of CH4/Air Premixed Flat Flame Burner Based on Tunable Diode Laser Absorption Spectroscopy

PENGYuquan 1,2、*, Ruifeng KAN1, Zhenyu XU1, Huihui XIA1, Wei NIE1,2, ZHANGBuqiang 1,2, and Xiaofan PEI1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less

    Temperature measurement is significant for combustion diagnosis. An on-line temperature measurement method based on tunable diode laser absorption spectroscopy(TDLAS) has been developed, which achieves dual laser cooperative work and simultaneous measurement of two absorption lines (7154.35 cm-1 and 7467.77 cm-1) of combustion product H2O by dual beam time dividing scanning strategy. The accurate inversion of the temperature is realized by two-line integral absorbance ratio, which meets the application needs of on-line temperature detection of the combustion field. The experimental research on real-time detection of flame temperature in CH4/air premixed flame furnace was carried out, and the results were compared with the thermocouple measurement, which shows TDLAS and thermocouples have good consistency with relative error less than 3.8%. The feasibility and reliability of non-intrusive and rapid temperature measurement of the combustion field based TDLAS technology have been verified.

    Tools

    Get Citation

    Copy Citation Text

    PENGYuquan, KAN Ruifeng, XU Zhenyu, XIA Huihui, NIE Wei, ZHANGBuqiang, PEI Xiaofan. Temperature Measurement of CH4/Air Premixed Flat Flame Burner Based on Tunable Diode Laser Absorption Spectroscopy[J]. Journal of Atmospheric and Environmental Optics, 2019, 14(3): 228

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Jan. 26, 2018

    Accepted: --

    Published Online: Jul. 20, 2019

    The Author Email: PENGYuquan (yqpeng@aiofm.ac.cn)

    DOI:10.3969/j.issn.1673-6141.2019.03.008

    Topics