Acta Optica Sinica, Volume. 14, Issue 6, 603(1994)

Fabrication of Silicon-Based GeSi Alloy Optical Waveguides

[in Chinese]1, [in Chinese]1, [in Chinese]1, [in Chinese]2, and [in Chinese]2
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less

    The new development in silicon optical integration, and the design andprocesses of fabricating GeSi/Si single-mode rib waveguide at the wavelength λ=1.3 μm is reported. The propagating loss of the waveguide has reached 0.7 dB/cm. The heightand width of the waveguide are 4~8 μm and 8~12 μm respectively. The size of themare comparable to those of single-mode fibre cores. Besides, the numerical aperture of thewaveguide at the ends are also matched to the fibre. The fabricated waveguide meets allthe demands of silicon optical integration. Finally, the single mode outputs from a Y-power-divider prepared by the GeSi-Si rib waveguides discribed above is shown.

    Tools

    Get Citation

    Copy Citation Text

    [in Chinese], [in Chinese], [in Chinese], [in Chinese], [in Chinese]. Fabrication of Silicon-Based GeSi Alloy Optical Waveguides[J]. Acta Optica Sinica, 1994, 14(6): 603

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Fiber Optics and Optical Communications

    Received: Dec. 7, 1993

    Accepted: --

    Published Online: Aug. 17, 2007

    The Author Email:

    DOI:

    Topics