Infrared and Laser Engineering, Volume. 46, Issue 5, 506003(2017)
Phase modulated lidar imaging design and simulation
The inverse synthetic aperture lidar(ISAL) have attracted increasing attention for its merits including smaller divergence angle of the signal source and smaller synthetic aperture under same cross-range resolution when compared with its inverse synthetic aperture radar (ISAR) counterpart. However, by using lidar instead of radar as the signal source, the most popular spread-spectrum techniques such as linear frequency modulation are not suitable for a practical ISAL. In order to obtain a highly repeatable and a broad frequency signal in a very short time, a maximum length sequence coded phase modulation method, which was a widespread method in optical communication, was adopted in this paper. The far-field signal model and the corresponding imaging algorithm were introduced in the first place. The main differences from traditional algorithms were addressed thereafter. Finally, a well-designed simulation target composed of several scattered center points was used to verify the validity of the proposed imaging algorithm. The results are analyzed with imaging parameters to prove the method introduced by this paper is adaptable for real-time ISAL.
Get Citation
Copy Citation Text
Huang Yuxiang, Zhang Hongyi1, Li Fei1, Xu Weiming1, Hu Yihua. Phase modulated lidar imaging design and simulation[J]. Infrared and Laser Engineering, 2017, 46(5): 506003
Category: 激光技术及应用
Received: Sep. 10, 2016
Accepted: Oct. 20, 2016
Published Online: Jul. 10, 2017
The Author Email: Yuxiang Huang (hyx0408@126.com)