Infrared and Laser Engineering, Volume. 49, Issue 8, 20190529(2020)

ROIC of ladar based on large array InGaAs linear APD

Tao Bai, Yuanjin Chen, Fang Dai, Chunye Xu, Xiaohuai Liu, Jiangping Lv, Chengyu Liu, Qiuli Li, and Ji Shen
Author Affiliations
  • East China Institute of Photo-Electronic, Suzhou 250100, China
  • show less

    A large array ROIC was designed by SMIC 0.35 μm 3.3 V CMOS technology for large array InGaAs linear APD which worked on back-illuminated mode. Each pixel of the ROIC and APD was interconnected by indium bump, realizing the effective transmission and reception of current pulse. Simulation and test shows that the equivalent current sensitivity of the pixel preamplifier is 5 μA@2.5 ns pulse width by using cascade input stage and self-biased common source amplifier stage. Based on counting TDC and voltage-controlled delay TDC union structure and at 125 MHz master clock on chip, the accuracy of the pixel TDC which uses multiple clock phase interpolating is 1 ns. The power consumption of 32×32 ROIC is reduced by 65% by using time sharing power supply technology.

    Tools

    Get Citation

    Copy Citation Text

    Tao Bai, Yuanjin Chen, Fang Dai, Chunye Xu, Xiaohuai Liu, Jiangping Lv, Chengyu Liu, Qiuli Li, Ji Shen. ROIC of ladar based on large array InGaAs linear APD[J]. Infrared and Laser Engineering, 2020, 49(8): 20190529

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: 激光器与激光光学

    Received: Dec. 1, 2019

    Accepted: --

    Published Online: Dec. 31, 2020

    The Author Email:

    DOI:10.3788/IRLA20190529

    Topics