Journal of Inorganic Materials, Volume. 37, Issue 3, 317(2022)

Influence of Debinding Process on the Properties of Photopolymerization 3D Printed Cordierite Ceramics

Junyi ZHU, Cheng ZHANG, Zhongqiang LUO, Jiwei CAO, Zhiyuan LIU, Pei WANG, Changyong LIU, and Zhangwei CHEN*
Author Affiliations
  • Additive Manufacturing Institute, Shenzhen University, Shenzhen 518060, China
  • show less

    Photopolymerization 3D printing method is an effective means for the manufacturing of ceramics with highly complex-shaped structures and exceptional performance. The printed samples need to undergo heat treatment such as debinding and sintering before becoming usable final ceramic parts in various industrial applications, and the debinding process has a great impact on the properties of the printed ceramic parts. In this study, effect of the debinding process on physical properties and mechanical performance of the cordierite ceramics prepared by DLP photopolymerization 3D printing was studied, and defect suppression strategy was established accordingly. The effects of debinding atmosphere and heating rate on surface cracks and material elemental distribution of ceramic samples were compared and analyzed. The microstructure, size shrinkage, relative density, and mechanical performance such as bending strength of the sintered samples were also studied. It is found that the debinding atmosphere has the most significant influence on the properties of the sintered samples, in which the surface cracks can be significantly reduced, and the relative density, and bending strength can be increased when the debinding process is conducted in argon atmosphere at the optimized heating rate of 1 ℃/min. After debinding and sintering, the cordierite ceramic samples with a relative density of (94.6±0.3)% and a bending strength of (94.3±3.2) MPa was obtained. In conclusion, this study provides a scientific basis and technical reference for fabrication and application of cordierite ceramics based on photopolymerization 3D printing method.

    Tools

    Get Citation

    Copy Citation Text

    Junyi ZHU, Cheng ZHANG, Zhongqiang LUO, Jiwei CAO, Zhiyuan LIU, Pei WANG, Changyong LIU, Zhangwei CHEN. Influence of Debinding Process on the Properties of Photopolymerization 3D Printed Cordierite Ceramics[J]. Journal of Inorganic Materials, 2022, 37(3): 317

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Oct. 8, 2021

    Accepted: --

    Published Online: Nov. 16, 2022

    The Author Email: CHEN Zhangwei (chen@szu.edu.cn)

    DOI:10.15541/jim20210624

    Topics