Infrared and Laser Engineering, Volume. 49, Issue 1, 113003(2020)
Measurement method for fragment velocity based on active screen array in static detonation test
In order to accurately and reliably measure the flying speed of the fragment in any horizontal direction in the static detonation test, a method for measuring the flying speed of the static detonation fragment based on active screen array was proposed. Firstly, twelve groups of active six-screen arrays were arranged around the static explosion point of measured ammunition. The flight parameters(such as velocity, incident angle and vertical target density) of these fragments can be obtained when they pass through the detection area in every six-screen arrays. Secondly, according to the configuration of the proposed screen array, its model was established to obtain the related flight parameters, and then the change rule of error with each velocity component was analyzed in a certain range. Through theoretical analysis and live ammunition experiment, results show that the component errors of fragment velocity is less than 2.7 m/s, and thus the proposed method can meet the measurement requirement of fragment velocity in any horizontal direction.
Get Citation
Copy Citation Text
Yang Jiuqi, Dong Tao, Chen Ding, Ni Jinping, Kai Baisheng. Measurement method for fragment velocity based on active screen array in static detonation test[J]. Infrared and Laser Engineering, 2020, 49(1): 113003
Category: 光电测量
Received: Oct. 5, 2019
Accepted: Nov. 15, 2019
Published Online: Jun. 8, 2020
The Author Email: Jiuqi Yang (1186270864@qq.com)