Infrared and Laser Engineering, Volume. 47, Issue 10, 1030003(2018)

Design of ultra-narrow filter for Rayleigh Doppler lidar

Li Zimu1、*, Chen Tingdi1, Liu Hengjia1, Sun Dongsong1, Wang Guocheng2, and Tang Lei3
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less

    The mobile lidar of USTC implements the continuous wind measurement in 15-60 km neutral atmosphere at night. Since the signal to noise radio was limited by background light during daytime operation, an ultra-narrow filter which combined an interference filter with a solid FP etalon was designed to reduce the background noise. An approach to solve the optimum parameters for the F-P etalon was proposed, based on the Frequency Discriminator, an etalon filter with bandwidth of 8.4 pm, center wavelength of 354.73 nm, free spectral range of 150 pm and peak transmission of 0.67 was achieved to decrease the background noise to one in eighteen. The improvement of SNR and velocity errors were simulated. The effect of temperature and tilting angle on bandwidth, center wavelength and transmissivity was calculated. A method of tuning by tilting angle was designed. The experiment result is highly uniform with the theoretical value.

    Tools

    Get Citation

    Copy Citation Text

    Li Zimu, Chen Tingdi, Liu Hengjia, Sun Dongsong, Wang Guocheng, Tang Lei. Design of ultra-narrow filter for Rayleigh Doppler lidar[J]. Infrared and Laser Engineering, 2018, 47(10): 1030003

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: 激光雷达技术

    Received: May. 11, 2018

    Accepted: Jun. 3, 2018

    Published Online: Nov. 25, 2018

    The Author Email: Zimu Li (lizimu@mail.ustc.edu.cn)

    DOI:10.3788/irla201847.1030003

    Topics