Spectroscopy and Spectral Analysis, Volume. 33, Issue 12, 3197(2013)

Effects of Different Annealing Conditions on the Photoluminescence of Nanoporous Alumina Film

XIE Ning*, MA Kai-di, SHEN Yi-fan, and WANG Qian
Author Affiliations
  • [in Chinese]
  • show less

    The nanoporous alumina films were prepared by two-step anodic oxidation in 0.5 mol·L-1 oxalic acid electrolyte at 40 V. Photoluminescence (PL) of nanoporous alumina films was investigated under different annealing atmosphere and different temperature. The authors got three results about the PL measurements. In the same annealing atmosphere, when the annealling temperature T≤600 ℃, the intensity of the PL peak increases with elevated annealing temperature and reaches a maximum value at 500 ℃, but the intensity decreases with a further increase in the annealing temperature, and the PL peak intensity of samples increases with the increase in the annealing temperature when the annealling temperature T≥800 ℃. In the different annealling atmosphere, the change in the photoluminescence peak position for nanoporous alumina films with the increase in the annealing temperature is different: With the increase in the annealling temperature, the PL peak position for the samples annealed in air atmosphere is blue shifted, while the PL peak position for the samples annealed in vacuum atmosphere will not change. The PL spectra of nanoporous alumina films annealed at 1 100 ℃ in air atmosphere can be de-convoluted by three Gaussian components at an excitation wavelength of 350 nm, with bands centered at 387, 410 and 439 nm, respectively. These results suggest that there might be three luminescence centers for the PL of annealed alumina films. At the same annealling temperature, the PL peak intensity of samples annealed in air atmosphere is stronger than that annealed in the vacuum. Based on the experimental results and the X-ray dispersive energy spectrum (EDS) combined with infrared reflect spectra, the luminescence mechanisms of nanoporous alumina films are discussed. There are three luminescence centers in the annealed nanoporous alumina films, which originate from the F center, F+ center and the center associated with the oxalic impurities. The effects of different annealing conditions on the photoluminescence of nanoporous alumina film are reasonably explained.

    Tools

    Get Citation

    Copy Citation Text

    XIE Ning, MA Kai-di, SHEN Yi-fan, WANG Qian. Effects of Different Annealing Conditions on the Photoluminescence of Nanoporous Alumina Film[J]. Spectroscopy and Spectral Analysis, 2013, 33(12): 3197

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Received: Jul. 9, 2013

    Accepted: --

    Published Online: Jan. 9, 2014

    The Author Email: Ning XIE (xieningxju@sina.cn)

    DOI:10.3964/j.issn.1000-0593(2013)12-3197-05

    Topics