Photonic Sensors, Volume. 4, Issue 4, 359(2014)
Design of Linear Sweep Source Based on DDS Used in Readout System for Wireless Passive Pressure Sensor
This paper proposes the design and research on the high bandwidth linear frequency sweep signal source involved in the readout unit module of the wireless passive pressure sensor in high temperature based on the principle of mutual inductance coupling which is applied widely at present. The operating principle of the linear sweep frequency source based on the direct digital frequency synthesis (DDS) technology is introduced, and the implementation method of the hardware circuit and logic sequential control process required in our system has been realized utilizing this technology. Through the experiments under different conditions of the step value, the sweep range and other related design indicators, the influence on the extraction method of resonance frequency information, extraction accuracy, and others during the readout system of the mutual inductance coupling sensor are analyzed and studied. The design of the linear frequency sweep signal source is realized with a resonance frequency change resolution of 6 kHz, a minimum step value of 1 kHz, and a precision of frequency for 0.116 Hz within the sweep width of 1 MHz – 100 MHz. Due to the use of the integrated commercial chip, the linear sweep frequency source is made small in size, high working frequency, high resolution and low step values for the readout unit modularized of a higher application value.
Get Citation
Copy Citation Text
Yingping HONG, Tingli ZHENG, Ting LIANG, Qun CAO, Hairui ZHANG, and Jijun XIONG. Design of Linear Sweep Source Based on DDS Used in Readout System for Wireless Passive Pressure Sensor[J]. Photonic Sensors, 2014, 4(4): 359
Received: Jul. 14, 2014
Accepted: Sep. 4, 2014
Published Online: Dec. 8, 2014
The Author Email: XIONG and Jijun (xiongjijunnuc@126.com)