Infrared and Laser Engineering, Volume. 46, Issue 3, 306001(2017)

Signal-to-noise ratio analysis on APD arrays in laser ranging

Xue Li1, Zhai Dongsheng2, Li Zhulian2, Li Yuqiang2, Xiong Yaoheng2, and Li Ming1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less

    APD arrays provide an efficient method for photon detection probability improvement. However, the noise detection probability increases as well as the echo detection probability. Properly choosing the unit number of APD arrays means a lot for signal-to-noise ratio (SNR) improvement. In this article, according to the photon detection probability in the Geiger-mode, the SNR model with the unit number N was established based on the distribution of echoes and noise within the range gate. Effects of number of echoes, noise rate, location of echoes and fill factor were discussed. Analytical results show that larger number of echoes, higher fill factor and more precise orbit prediction help increase the SNR with APD arrays. 4-unit APD arrays are enough for laser ranging with echo number smaller than 0.1 and noise number within the range gate smaller than 1, while when there are large number of echoes and noise, 25-unit APD arrays will achieve a better SNR. The established SNR model for APD arrays will help for proper unit number selection to achieve the best SNR.

    Tools

    Get Citation

    Copy Citation Text

    Xue Li, Zhai Dongsheng, Li Zhulian, Li Yuqiang, Xiong Yaoheng, Li Ming. Signal-to-noise ratio analysis on APD arrays in laser ranging[J]. Infrared and Laser Engineering, 2017, 46(3): 306001

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: 激光技术及应用

    Received: Jul. 8, 2016

    Accepted: Aug. 6, 2016

    Published Online: Jun. 27, 2017

    The Author Email:

    DOI:10.3788/irla201746.0306001

    Topics