Spectroscopy and Spectral Analysis, Volume. 33, Issue 4, 991(2013)

Research on the Quantitative Analysis of D2 Using Raman Spectroscopy

WANG Hong-zu*, SHEN Chun-lei, LONG Xing-gui, LIANG Jian-hua, and ZHOU Xiao-song
Author Affiliations
  • [in Chinese]
  • show less

    Raman spectroscopy was used for experimental research on D2 signal to noise ratio(SNR) under different conditions. The 32 mW Ar+ laser was injected into the Raman quartz glass cells to study the effect of grating, laser power, exposure time and the gas pressure on D2 Raman spectra SNR. D2 Raman spectral signal to noise ratio is proportional to the laser power, exposure time and gas pressure. The standard curve of the pressure and SNR for this experimental apparatus was obtained. Three sets of random samples were used to verify the formula SNR(J 2→2)=10.6×10-4p+1.271 34. When the deuterium pressure is 21 280 Pa, the relative error is 4.8%. When the pressure increases to 67 235 Pa, the relative error is down to 1.46%.

    Tools

    Get Citation

    Copy Citation Text

    WANG Hong-zu, SHEN Chun-lei, LONG Xing-gui, LIANG Jian-hua, ZHOU Xiao-song. Research on the Quantitative Analysis of D2 Using Raman Spectroscopy[J]. Spectroscopy and Spectral Analysis, 2013, 33(4): 991

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Received: Aug. 28, 2012

    Accepted: --

    Published Online: Apr. 8, 2013

    The Author Email: Hong-zu WANG (whzshark@yahoo.com.cn)

    DOI:10.3964/j.issn.1000-0593(2013)04-0991-05

    Topics