Journal of Terahertz Science and Electronic Information Technology , Volume. 22, Issue 7, 758(2024)
Design of 3D heterogeneous film-based transceiver SiP module in X-band
A four-channel X-band chip transceiver System in a Package(SiP) module was realized by integrating multiple Monolithic Microwave Integrated Circuits(MMICs) and passive power division network into a very compact volume using silicon-based 3D heterogeneous integration technology. The module is Package on Package(PoP) stacked by two silicon-based packages, and the different packages are interconnected through the Ball Grid Array(BGA) mode. Chips are installed on the upper and lower surfaces of the inner cavity of a single package. The internal package is vertically interconnected using Through Silicon Via(TSV) and the module dimensions are 14 mm×14 mm×3.2 mm. The test results show that within 8~12 GHz, the transmission saturation output power of the module is ≥30.5 dBm, the receiving gain is ≥24.5 dB, the noise figure is ≤3 dB, the receiving input P-1 is ≥-26 dBm, and it also features 6-bit digital phase shifting and 6-bit digital attenuation capabilities, weighs approximately 1 g.It can be widely used in microwave transceiver system.
Get Citation
Copy Citation Text
LI Xiaolin, LIU Xing, GAO Yanhong, ZHAO Yu, XU Chunliang. Design of 3D heterogeneous film-based transceiver SiP module in X-band[J]. Journal of Terahertz Science and Electronic Information Technology , 2024, 22(7): 758
Category:
Received: Nov. 27, 2023
Accepted: --
Published Online: Aug. 22, 2024
The Author Email: Xiaolin LI (cetclxl@163.com)