Journal of Atmospheric and Environmental Optics, Volume. 18, Issue 5, 494(2023)
Calibration of cavity mirror reflectivity in off-axis integrated cavity output spectroscopy based on radio frequency noise sources
Off-axis integral cavity output spectroscopy technology has the characteristics of simple experimental setup, high sensitivity and fast response time, and is widely used in various ultra-sensitive gas detection fields. As an important part of the system, the high reflectivity mirrors are one of the important factors affecting the accuracy measurement of the entire spectral system. A set of off-axis integral cavity output spectral measurement system was built with the radio frequency noise source. Firstly, the absorption spectrum line of CH4 gas at 6046.96 cm-1 was taken as the research target, and the reflectivity of the cavity mirror was calibrated under different pressures with and without noise sources. The results show that the reflectivity calibrated under two different conditions, with and without noise sources, is consistent, and the reflectivity tends to decrease with the increase of pressure. The calculated highest reflectivity of the lens is about 0.99992. Furthermore, the CH4 measurement signal at a concentration of 0.4 μmol/mol with and without noise sources was studied. It is found that after introducing noise sources, although the signal peak height is reduced, the signal-to-noise ratio is increased by about 1.3 times, and the minimum detectable concentration is 0.0045 μmol/mol, which indicates that the developed system can be effectively used for high sensitivity measurement of CH4 in atmospheric environment and industrial applications.
Get Citation
Copy Citation Text
Xing TIAN, Lewen ZHU, Long LI, Zisen HUA, Yanan CAO, Gang CHENG. Calibration of cavity mirror reflectivity in off-axis integrated cavity output spectroscopy based on radio frequency noise sources[J]. Journal of Atmospheric and Environmental Optics, 2023, 18(5): 494
Category:
Received: Jul. 31, 2022
Accepted: --
Published Online: Dec. 1, 2023
The Author Email: CHENG Gang (chgmech@mail.ustc.edu.cn)