Acta Optica Sinica, Volume. 30, Issue 7, 2154(2010)

Design and Manufacture of Birefringent Non-Polarizing Thin Films

Wang Qingyun1,2、*, Qi Hongji1,3, He Hongbo1, Shao Jianda1, and Fan Zhengxiu1
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • 3[in Chinese]
  • show less

    Based on the birefringent characteristic of thin film fabricated by glancing angle deposition(GLAD),a birefringent non-polarizing thin film at wavelength 632 nm only using titanium oxide is designed and deposited. At the beginning,two titanium oxide monolayers were deposited with the deposition angle 60° and 70° respectively. The effective refractive index of the monolayer for s- and p-polarization,nPH,nSH and nPL,nSL ,were obtained. a higher s transmittance than p polarization at normal incidence is got by arranging the index correctly,since the increase of the incidence would bring an opposite effect,we could get a non-polarizing effect at a very angle can be got. Based on the analysis above,a non-polarizing thin film was designed and prepared. The s- and p-polarization transmission spectra of non-polarizing film were measured with photometer at normal and tilted incidence. At the incidence angle of 60°,the reflection band width of s- and p-polarizations were less different and the non-polarizing effect was achieved partially. The obliquely incident non-polarizing thin film can be designed based on the thin film material′s birefringence.

    Tools

    Get Citation

    Copy Citation Text

    Wang Qingyun, Qi Hongji, He Hongbo, Shao Jianda, Fan Zhengxiu. Design and Manufacture of Birefringent Non-Polarizing Thin Films[J]. Acta Optica Sinica, 2010, 30(7): 2154

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category: Thin Films

    Received: Jul. 15, 2009

    Accepted: --

    Published Online: Jul. 13, 2010

    The Author Email: Qingyun Wang (qy_wang_siom@163.com)

    DOI:10.3788/aos20103007.2154

    Topics