Infrared and Laser Engineering, Volume. 45, Issue 8, 822007(2016)
Application of DWDM technology in new wavelength demodulation method
In order to realize the wavelength demodulation of the optical fiber sensor, a 8 channel 50 GHz dense wavelength division multiplexer was used as the demodulation tool of the fiber Bragg grating pressure sensor. Taking the center wavelength of each channel as the calibration standard, the optical power output obtained from each channel was utilized to acquire the envelope of the distribution curve of the fiber grating reflection spectrum. By using the Gauss polynomial fitting method as peak-seek algorithm of fiber grating wavelength, the accurate position of the center wavelength of the fiber grating reflection spectrum was obtained and a simple structure, low cost, all-fiber wavelength demodulation system was achieved. The experimental results show that the linear fitting degree of the system pressure and wavelength is 0.996 5, the measured wavelength resolution is 0.3 pm, the maximum reference error is 2.6%, and the measurement accuracy is 0.16 MPa.
Get Citation
Copy Citation Text
Yang Yang, Liu Bing, Zhao Yong, Yang Yang, Wang Hui, Zhao Yali, Du Yao. Application of DWDM technology in new wavelength demodulation method[J]. Infrared and Laser Engineering, 2016, 45(8): 822007
Category: 光通信与光传感
Received: Dec. 11, 2015
Accepted: Jan. 23, 2016
Published Online: Aug. 29, 2016
The Author Email: