Opto-Electronic Engineering, Volume. 43, Issue 1, 30(2016)

Error Analysis for the MTF Rapidly Inspecting Method of Near-to-eye Display Optical System

SUN Qi1...2, QIU Chuankai1, YANG Huan1 and YANG Xiaojun1 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less

    To measure the Modulation Transfer Function (MTF) based on the theory of frequency spectrum is one of methods to rapidly evaluate the image quality of near-to-eye display system. However, some parameters during the rapid measurement have an obvious impact on the experiment results. So eliminating and offsetting the dispersion are the mostly factors when the method can be applied to measurement successfully or not. Reasons that may cause the error during measurement are analyzed specifically, and then influence degree of errors and method of discriminating clarity are discussed. Analysis of the main errors affecting the measurement of Contrast Transfer Function (CTF) shows that error value is below 3% when the tilt angle is within ±0.5°, brightness of light changes in the range of 0.6I~I, (I is the maximum value when the CCD works in the linear region) and object length changes within 5 mm, and the errors are all less than 1.5%. The experiment results verify the feasibility and practicability of the method and have the instructive significance on improving measure precision.

    Tools

    Get Citation

    Copy Citation Text

    SUN Qi, QIU Chuankai, YANG Huan, YANG Xiaojun. Error Analysis for the MTF Rapidly Inspecting Method of Near-to-eye Display Optical System[J]. Opto-Electronic Engineering, 2016, 43(1): 30

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Apr. 7, 2015

    Accepted: --

    Published Online: Mar. 22, 2016

    The Author Email:

    DOI:10.3969/j.issn.1003-501x.2016.01.006

    Topics