Infrared and Laser Engineering, Volume. 48, Issue 12, 1204001(2019)
Calibration technology of infrared standard transfer radiometer based on stimulated parametric down-conversion
Based on the correlation properties of photons generated during the process of the stimulated parametric down-conversion, a system for infrared standard transfer radiation measurement was constructed, which required no refrigeration and only used visible light detector. Firstly, the operating principle of the infrared standard transfer radiometer system was described in detail. Then, the calibration coefficient of the system was acquired by using the standard blackbody fitting, and the relationship between the temperature of the infrared standard transfer radiometer and the response value of the blackbody to be measured was obtained. Finally, the uncertainty of the infrared standard transfer radiometer system was further evaluated and verified by being compared with the radiation temperature retrieved from the response value of water-bath blackbody at the same temperature. The experimental results show that the joint uncertainty of the infrared standard transfer radiometer for measuring the radiation brightness of the water-bath blackbody is 1.64%, indicating that the infrared standard transfer radiometer can be used as the transfer standard of the blackbody to the user sensor.
Get Citation
Copy Citation Text
Sheng Wenyang, Xia Maopeng, Li Jianjun, Zhai Wenchao, Zheng Xiaobing. Calibration technology of infrared standard transfer radiometer based on stimulated parametric down-conversion[J]. Infrared and Laser Engineering, 2019, 48(12): 1204001
Received: Jul. 5, 2019
Accepted: Aug. 15, 2019
Published Online: Feb. 11, 2020
The Author Email: Wenyang Sheng (shengwy@mail.ustc.edu.cn)