Spectroscopy and Spectral Analysis, Volume. 31, Issue 7, 1964(2011)
Preparation of Electrodeposited Cr-La Coating and Its Spectral Properties
Cr-La coating(dc) and Cr-La coating(pulse) were prepared by electrodeposition method of direct current and pulsating current respectively. The Cr-La coating (dc) and Cr-La coating (pulse) were characterized with ICP-AES, EDAX, XRD and SEM techniques, respectively. Cr-La coating(dc) was amorphous. There were crystalline La and CrC in Cr-La coating(pulse). The microhardness of the Cr-La coating(dc) and Cr-La coating(pulse) were as high as 860.3 and 930.2 HV respectively, which were higher 11.15% and 20.18% higher than that of the Cr coating (774.0 HV). The wear weight losses of Cr-La coating(dc) and Cr-La coating(pulse) were 1.29 and 2.25 times lower than that of Cr coating, respectively. The friction coefficient of Cr coating, Cr-La coating(dc) and Cr-La coating(pulse) were 0.884, 0.640 and 0.648 respectively. The properties of wear weight loss and microhardness of coatings were improved with pulsating current. The wear weight loss and microhardness of Cr-La coating(pulse) were lower 1.75 time lower and higher 8.13% higher than that of the Cr-La coating(dc), respectively.
Get Citation
Copy Citation Text
LIU Xiao-zhen, WANG Gang, SONG Ling-ling, LI Xin, ZHU Xu-qiang. Preparation of Electrodeposited Cr-La Coating and Its Spectral Properties[J]. Spectroscopy and Spectral Analysis, 2011, 31(7): 1964
Received: Aug. 24, 2010
Accepted: --
Published Online: Aug. 29, 2011
The Author Email: Xiao-zhen LIU (liuxiaozhen1958@yahoo.com)