Optics and Precision Engineering, Volume. 16, Issue 9, 1603(2008)

Preliminary study of reaction bonded silicon carbide surface modification

WANG Tong-tong1...2,*, GAO Jin-song1, WANG Xiao-yi1, CHEN Hong1, ZHENG Xuan-ming1, FAN Di1, and SHEN Zhen-feng12 |Show fewer author(s)
Author Affiliations
  • 1[in Chinese]
  • 2[in Chinese]
  • show less

    SiC:H surface-modified coatings were fabricated on Reaction Bonded Silicon Carbide(RB SiC) substrates.Silicon was evaporated by E-beam and methane was ionized as reactive gas by End-Hall ion source.X-ray Diffraction(XRD) results show the fabricated film is α phase,its hardness and elastic modulus are in the range of 9.781~13.087 GPa and 89.344~123.413 GPa,respectively.After surface-modification polishing and coating silver,the reflectance of modified RB SiC film is close to that of fine polished Zerodur glass coating with silver.Moreover,the fabricated coatings to the substrate show very good adhesion and no fall-off and cracks in thermal impact test from liquid nitrogen temperature to boiling water temperature for 5 cycles.

    Tools

    Get Citation

    Copy Citation Text

    WANG Tong-tong, GAO Jin-song, WANG Xiao-yi, CHEN Hong, ZHENG Xuan-ming, FAN Di, SHEN Zhen-feng. Preliminary study of reaction bonded silicon carbide surface modification[J]. Optics and Precision Engineering, 2008, 16(9): 1603

    Download Citation

    EndNote(RIS)BibTexPlain Text
    Save article for my favorites
    Paper Information

    Category:

    Received: Nov. 22, 2007

    Accepted: --

    Published Online: Feb. 28, 2010

    The Author Email: Tong-tong WANG (wangttbox@hotmail.com)

    DOI:

    CSTR:32186.14.

    Topics