[1] [1] Khairallah S A, Anderson A T, Rubenchik A and King W E 2016 Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones Acta Mater.108 36–45

[2] [2] MacDonald E and Wicker R 2016 Multiprocess 3D printing for increasing component functionality Science353 aaf2093

[3] [3] Wang Y M et al 2018 Additively manufactured hierarchical stainless steels with high strength and ductility Nat. Mater.17 63–71

[4] [4] Sun X Y, Chen M N, Liu T T, Zhang K, Wei H L, Zhu Z G and Liao W H 2024 Characterization, preparation, and reuse of metallic powders for laser powder bed fusion: a review Int. J. Extrem. Manuf.6 012003

[5] [5] Gao W, Zhang Y B, Ramanujan D, Ramani K, Chen Y, Williams C B, Wang C C L, Shin Y C, Zhang S and Zavattieri P D 2015 The status, challenges, and future of additive manufacturing in engineering Comput.-Aided Des.69 65–89

[6] [6] Liu Z Z, Zhou Q H, Liang X K, Wang X B, Li G C, Vanmeensel K and Xie J X 2024 Alloy design for laser powder bed fusion additive manufacturing: a critical review Int. J. Extrem. Manuf.6 022002

[7] [7] Brock L, Ogunsanya I, Asgari H, Patel S and Vlasea M 2021 Relative performance of additively manufactured and cast aluminum alloys J. Mater. Eng. Perform30 760–82

[8] [8] Ballardini R M, Flores Ituarte I and Pei E J 2018 Printing spare parts through additive manufacturing: legal and digital business challenges J. Manuf. Technol. Manage.29 958–82

[9] [9] Kusoglu I M, Gkce B and Barcikowski S 2020 Research trends in laser powder bed fusion of Al alloys within the last decade Addit. Manuf.36 101489

[10] [10] Zhao L, Song L B, Santos Macas J G, Zhu Y X, Huang M S, Simar A and Li Z H 2022 Review on the correlation between microstructure and mechanical performance for laser powder bed fusion AlSi10Mg Addit. Manuf.56 102914

[11] [11] Martin J H, Yahata B D, Hundley J M, Mayer J A, Schaedler T A and Pollock T M 2017 3D printing of high-strength aluminium alloys Nature549 365–9

[12] [12] Association A 2006 Designations and Chemical Composition Limits for Aluminum Alloys in the Form of Castings and Ingot (The Aluminum Association)

[13] [13] Pauzon C, Buttard M, Desprs A, Charlot F, Fivel M, Chehab B, Blandin J J and Martin G 2023 Direct ageing of LPBF Al-1Fe-1Zr for high conductivity and mechanical performance Acta Mater.258 119199

[14] [14] Zheng H, Li H X, Lang L H, Gong S L and Ge Y L 2018 Effects of scan speed on vapor plume behavior and spatter generation in laser powder bed fusion additive manufacturing J. Manuf. Process.36 60–67

[15] [15] Wang D, Wu S B, Fu F, Mai S, Yang Y Q, Liu Y and Song C H 2017 Mechanisms and characteristics of spatter generation in SLM processing and its effect on the properties Mater. Des.117 121–30

[16] [16] Ikeshoji T T, Yonehara M, Kato C, Yanaga Y, Takeshita K and Kyogoku H 2022 Spattering mechanism of laser powder bed fusion additive manufacturing on heterogeneous surfaces Sci. Rep.12 20384

[17] [17] Kelly D, Fischer R D, Moaven M, Morris S, Prorok B C and Thurow B 2023 Simultaneous 3D tracking and temperature measurements of L-PBF spatter particles using a single camera Addit. Manuf. Lett.6 100134

[18] [18] Esmaeilizadeh R, Ali U, Keshavarzkermani A, Mahmoodkhani Y, Marzbanrad E and Toyserkani E 2019 On the effect of spatter particles distribution on the quality of Hastelloy X parts made by laser powder-bed fusion additive manufacturing J. Manuf. Process.37 11–20

[19] [19] Eschner E, Staudt T and Schmidt M 2019 3D particle tracking velocimetry for the determination of temporally resolved particle trajectories within laser powder bed fusion of metals Int. J. Extrem. Manuf.1 035002

[20] [20] Young Z A, Guo Q L, Parab N D, Zhao C, Qu M L, Escano L I, Fezzaa K, Everhart W, Sun T and Chen L Y 2020 Types of spatter and their features and formation mechanisms in laser powder bed fusion additive manufacturing process Addit. Manuf.36 101438

[21] [21] Chen H and Yan W T 2020 Spattering and denudation in laser powder bed fusion process: multiphase flow modelling Acta Mater.196 154–67

[22] [22] Ly S, Rubenchik A M, Khairallah S A, Guss G and Matthews M J 2017 Metal vapor micro-jet controls material redistribution in laser powder bed fusion additive manufacturing Sci. Rep.7 4085

[23] [23] Leung C L A, Marussi S, Towrie M, Atwood R C, Withers P J and Lee P D 2019 The effect of powder oxidation on defect formation in laser additive manufacturing Acta Mater.166 294–305

[24] [24] Zhao C, Guo Q L, Li X X, Parab N, Fezzaa K, Tan W D, Chen L Y and Sun T 2019 Bulk-explosion-induced metal spattering during laser processing Phys. Rev. X 9 021052

[25] [25] Nassar A R, Gundermann M A, Reutzel E W, Guerrier P, Krane M H and Weldon M J 2019 Formation processes for large ejecta and interactions with melt pool formation in powder bed fusion additive manufacturing Sci. Rep.9 5038

[26] [26] Taheri Andani M, Dehghani R, Karamooz-Ravari M R, Mirzaeifar R and Ni J 2017 Spatter formation in selective laser melting process using multi-laser technology Mater. Des.131 460–9

[27] [27] Iantaffi C, Leung C L A, Chen Y H, Guan S L, Atwood R C, Lertthanasarn J, Pham M S, Meisnar M, Rohr T and Lee P D 2021 Oxidation induced mechanisms during directed energy deposition additive manufactured titanium alloy builds Addit. Manuf. Lett.1 100022

[28] [28] Simonelli M, Tuck C, Aboulkhair N T, Maskery I, Ashcroft I, Wildman R D and Hague R 2015 A study on the laser spatter and the oxidation reactions during selective laser melting of 316L stainless steel, Al-Si10-Mg, and Ti-6Al-4V Metall. Mater. Trans. A 46 3842–51

[29] [29] Bidare P, Bitharas I, Ward R M, Attallah M M and Moore A J 2018 Fluid and particle dynamics in laser powder bed fusion Acta Mater.142 107–20

[30] [30] Chen Y H, Clark S J, Leung C L A, Sinclair L, Marussi S, Olbinado M P, Boller E, Rack A, Todd I and Lee P D 2020 In-situ Synchrotron imaging of keyhole mode multi-layer laser powder bed fusion additive manufacturing Appl. Mater. Today20 100650

[31] [31] Huang Y Z, Fleming T G, Clark S J, Marussi S, Fezzaa K, Thiyagalingam J, Leung C L A and Lee P D 2022 Keyhole fluctuation and pore formation mechanisms during laser powder bed fusion additive manufacturing Nat. Commun.13 1170

[32] [32] Leung C L A, Marussi S, Towrie M, Del Val Garcia J, Atwood R C, Bodey A J, Jones J R, Withers P J and Lee P D 2018 Laser-matter interactions in additive manufacturing of stainless steel SS316L and 13–93 bioactive glass revealed by in situ x-ray imaging Addit. Manuf.24 647–57

[33] [33] Guo Q L, Zhao C, Escano L I, Young Z, Xiong L H, Fezzaa K, Everhart W, Brown B, Sun T and Chen L Y 2018 Transient dynamics of powder spattering in laser powder bed fusion additive manufacturing process revealed by in-situ high-speed high-energy x-ray imaging Acta Mater.151 169–80

[34] [34] Rees D T, Leung C L A, Elambasseril J, Marussi S, Shah S, Marathe S, Brandt M, Easton M and Lee P D 2023 In situ x-ray imaging of hot cracking and porosity during LPBF of Al-2139 with TiB2 additions and varied process parameters Mater. Des.231 112031

[35] [35] Bitharas I, Parab N, Zhao C, Sun T, Rollett A D and Moore A J 2022 The interplay between vapour, liquid, and solid phases in laser powder bed fusion Nat. Commun.13 2959

[36] [36] Sinclair L, Leung C L A, Marussi S, Clark S J, Chen Y H, Olbinado M P, Rack A, Gardy J, Baxter G J and Lee P D 2020 In situ radiographic and ex situ tomographic analysis of pore interactions during multilayer builds in laser powder bed fusion Addit. Manuf.36 101512

[37] [37] Weitkamp T, Tafforeau P, Boller E, Cloetens P, Valade J P, Bernard P, Peyrin F, Ludwig W, Helfen L and Baruchel J 2010 Status and evolution of the ESRF beamline ID19 AIP Conf. Proc.1221 33–38

[38] [38] Bhatt A, Huang Y Z, Leung C L A, Soundarapandiyan G, Marussi S, Shah S, Atwood R C, Fitzpatrick M E, Tiwari M K and Lee P D 2023 In situ characterisation of surface roughness and its amplification during multilayer single-track laser powder bed fusion additive manufacturing Addit. Manuf.77 103809

[39] [39] Schindelin J et al 2012 Fiji: an open-source platform for biological-image analysis Nat. Methods9 676–82

[40] [40] Leung C L A, Marussi S, Atwood R C, Towrie M, Withers P J and Lee P D 2018 In situ x-ray imaging of defect and molten pool dynamics in laser additive manufacturing Nat. Commun.9 1355

[41] [41] Tinevez J Y, Perry N, Schindelin J, Hoopes G M, Reynolds G D, Laplantine E, Bednarek S Y, Shorte S L and Eliceiri K W 2017 TrackMate: an open and extensible platform for single-particle tracking Methods115 80–90

[42] [42] Mills K C, Keene B J, Brooks R F and Shirali A 1998 Marangoni effects in welding Phil. Trans. Roy. Soc. A 356 911–25

[43] [43] Leung C L A, Luczyniec D, Guo E Y, Marussi S, Atwood R C, Meisnar M, Saunders B and Lee P D 2022 Quantification of interdependent dynamics during laser additive manufacturing using x-ray imaging informed multi-physics and multiphase simulation Adv. Sci.9 2203546

[44] [44] Thomson W 1871 XLVI. Hydrokinetic solutions and observations London, Edinburgh Dublin Phil. Mag. J. Sci.42 362–77

[45] [45] Helmholtz P 1868 XLIII. On discontinuous movements of fluids London, Edinburgh Dublin Phil. Mag. J. Sci.36 337–46

[46] [46] Ladani L, Romano J, Brindley W and Burlatsky S 2017 Effective liquid conductivity for improved simulation of thermal transport in laser beam melting powder bed technology Addit. Manuf.14 13–23

[47] [47] Liu J G and Wen P 2022 Metal vaporization and its influence during laser powder bed fusion process Mater. Des.215 110505

[48] [48] King W E, Barth H D, Castillo V M, Gallegos G F, Gibbs J W, Hahn D E, Kamath C and Rubenchik A M 2014 Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing J. Mater. Process. Technol.214 2915–25

[49] [49] Brandau B, Da Silva A, Wilsnack C, Brueckner F and Kaplan A F H 2022 Absorbance study of powder conditions for laser additive manufacturing Mater. Des.216 110591

[50] [50] Leitner M, Leitner T, Schmon A, Aziz K and Pottlacher G 2017 Thermophysical properties of liquid aluminum Metall. Mater. Trans. A 48 3036–45

[51] [51] Mayi Y A, Dal M, Peyre P, Bellet M, Metton C, Moriconi C and Fabbro R 2020 Laser-induced plume investigated by finite element modelling and scaling of particle entrainment in laser powder bed fusion J. Phys. D: Appl. Phys.53 075306

[52] [52] Matthews M J, Guss G, Khairallah S A, Rubenchik A M, Depond P J and King W E 2016 Denudation of metal powder layers in laser powder bed fusion processes Acta Mater.114 33–42

[53] [53] Ashkin A 1970 Acceleration and trapping of particles by radiation pressure Phys. Rev. Lett.24 156–9

[54] [54] Williams M D 1982 Laser reflection from oxide-coated aluminum Appl. Opt.21 747–50

[55] [55] Brandl E, Heckenberger U, Holzinger V and Buchbinder D 2012 Additive manufactured AlSi10Mg samples using selective laser melting (SLM): microstructure, high cycle fatigue, and fracture behavior Mater. Des.34 159–69

[56] [56] SA K et al 2020 Controlling interdependent meso-nanosecond dynamics and defect generation in metal 3D printing Science368 660–5